ADAS calibration at Glass-Pol costs approximately 450 PLN when replacing the windshield and 550 PLN as a separate service. We explain what the price includes, what it depends on, and how long it takes.
ADAS calibration after windshield replacement costs approximately 450 PLN at Glass-Pol when you replace the windshield with us and 550 PLN when you come for calibration only. The exact price is confirmed for a specific model, as it depends on the brand, the number of systems, and the procedure specified by the vehicle manufacturer.
Modern cars are equipped with advanced driver assistance systems (ADAS) that utilize sensors such as cameras and radars. The most important camera is located at the front windshield, just behind the rearview mirror. After replacing the windshield, the camera shifts position by fractions of a millimeter and needs to be recalibrated. Below, we explain what you are paying for, why calibration costs what it does, how long it takes, and when it is not worth skipping.
We provide two indicative rates. Both relate to the calibration of the driver assistance system camera mounted at the windshield.
| Service | Approximate Price | When |
|---|---|---|
| Calibration during windshield replacement at Glass-Pol | 450 PLN | we perform the windshield replacement and calibration in one place |
| Calibration only | 550 PLN | windscreen replaced at another service, camera removed, system error |
It is cheaper to combine the replacement and calibration in one place, and you don't have to schedule two visits to two workshops. In cars where the manufacturer requires calibration of several systems or a combined procedure, the price may vary. We will provide it before accepting the vehicle, based on the VIN number or the brand, model, and year of manufacture.
Calibration is only part of the bill for replacing a windshield with a camera. We have gathered the prices for the installation of windshields with various equipment in the entry how much does it cost to replace a windshield with sensors and a camera.
Calibration is not just connecting a computer to the diagnostic socket. The price includes the entire procedure specified by the vehicle manufacturer:
The protocol is useful later: when selling the vehicle, when settling a claim, and when the assistant starts behaving strangely, and it needs to be established whether the procedure was performed.
The question about the price of calibration is often asked because for the driver it is "just adjusting the camera." However, there are costs behind this service that are not visible from the driver's seat.
Static calibration requires a device for calibrating ADAS systems, which is a frame with templates. The patterns of the templates differ between brands and often between models. Volkswagen has different requirements than Toyota, Ford, Hyundai, or Volvo. A service that handles cars from many manufacturers must have a complete set of templates and supplement it as new models enter the market.
The procedure is initiated using a diagnostic tester with software and access to the manufacturer's data. Licenses are paid and require regular updates, as manufacturers change procedures along with the subsequent versions of vehicle software.
Static calibration requires a flat, leveled floor, free space in front of the vehicle, and uniform lighting without glare. Such a workstation takes up space in the workshop and cannot be replaced by an area in front of the building.
Precise calibration cannot be done in a hurry. Positioning the vehicle and the template with millimeter accuracy, conducting the procedure, and checking the results takes several dozen minutes, and sometimes several hours. The technician must know the procedures for different brands and know what to do if calibration fails, for example, due to poor suspension geometry or improperly installed glass.
Therefore, calibration is not an addition to windshield replacement, but a part of it. An uncalibrated braking or lane-keeping assistant may react too late or at the wrong moment, and the consequences of such a mistake cost incomparably more than the service itself.
The cost of the service depends on the vehicle's brand and the type of calibration required, and several factors simultaneously influence the final amount:
Geometry is particularly important. The camera assesses distances and the trajectory of the vehicle relative to its axis. If the wheel alignment or the vehicle's suspension height deviates from the norm, calibration may fail or yield incorrect results, even with a perfectly installed windshield. In such cases, the geometry must be adjusted first, and only then can the camera be calibrated.
The procedure the vehicle undergoes depends not on the service but on the vehicle manufacturer. Each has different requirements and durations.
This is performed while the vehicle is stationary, in the workshop. The vehicle is positioned on a level platform, and a calibration board specific to the make is set up at a precisely defined distance and height relative to the vehicle's axis. The camera reads the pattern from the board, and the tester records new reference values.
This occurs while driving. The tester switches the system to learning mode, and the vehicle travels at a constant speed on a road with clear lane markings. Good visibility and clear horizontal markings are required, so in heavy rain or on a road without lines, the procedure may take longer.
In some newer models, the manufacturer requires both stages: first static calibration in the workshop, followed by a drive. This is the most time-consuming variant.
The static procedure usually lasts from 45 minutes to two hours. With dynamic calibration, driving adds another half hour. If calibration is part of the windshield replacement, the curing time of the adhesive must be added, as cameras cannot be calibrated on a windshield that is still curing.
In practice, it's advisable to reserve half a day for windshield replacement with calibration. You can pick up the vehicle the same day, with functioning systems and a protocol.
Calibration has a clear outcome: the diagnostic tester either confirms the completion of the procedure or interrupts it with an error message. There is no intermediate state where the camera is "almost calibrated." After the procedure is completed, we check whether the assistants activate normally and whether any errors have been recorded in the controllers.
If the procedure does not complete, the cause usually lies outside the camera itself: in the wheel geometry, suspension height, improperly installed windshield, or a windshield with a different camera mount than the factory one. In such cases, the cause must be addressed first, and only then can the calibration be repeated. After the vehicle is released, it is advisable to pay attention to the behavior of the assistants for the first few days, especially the lane-keeping and sign recognition assistants.
The camera must be calibrated whenever its position relative to the vehicle or the vehicle's position relative to the road changes. The most common situations include:
The step-by-step procedure and a complete list of situations in which calibration is required are described in the guide ADAS calibration after windshield replacement - when it is mandatory and what it looks like.
Most often, drivers come for calibration when their windshield was replaced at a location without a calibration station, or if the system warning light came on a few days after replacement. This is the service priced at 550 PLN.
Before we begin the procedure, we check the windshield. The camera is held by a factory-installed mount in the windshield, so a windshield with a different mount or improperly seated in the opening will not allow for proper calibration, even with the best equipment. If the windshield does not match the vehicle's equipment, we will inform you of this before calibration, not after.
When reporting, it is helpful to provide information about when the windshield was replaced and what its euro code or manufacturer is. If you have a receipt or document from the previous service, please bring it with you.
The camera at the front windshield is the only "eye" of the vehicle for many systems. Its positioning affects the proper functioning of functions such as:
The list depends on the model and equipment version. The rain and dusk sensor, which is also located near the windshield, usually does not require calibration, but it must be properly adhered to the new glass; otherwise, the wipers and lights will start reacting with a delay.
The terms "camera calibration" and "ADAS system calibration" are often used interchangeably, although they do not mean the same thing. The camera near the windshield, just behind the mirror, usually handles lane keeping assist, traffic sign recognition, and automatic high beams, and in many vehicles, it also works with the emergency braking system.
However, ADAS systems also include radars: the active cruise control (ACC) radar in the grille or bumper and sensors in the corners of the bumpers. The radar requires calibration after repair or replacement of the bumper, after a front-end collision, and after geometry changes. The mere replacement of the windshield usually does not affect it, so calibration after windshield replacement pertains to the camera. Full calibration of ADAS systems, meaning both cameras and radars at once, is mainly needed after front-end repairs. ADAS systems in vehicles also include cameras and sensors that assist with parking, but these are located in mirrors and bumpers, not near the windshield.
At Glass-Pol services, we perform professional calibration of both front cameras and ADAS system radars for most makes and models of vehicles. If you need calibration after windshield replacement or front-end repair, contact us to schedule an appointment.
A vehicle after windshield replacement without calibration will drive, but the camera-based systems will operate on old data. A camera shifted by a fraction of a degree sees the lane and obstacles in a different place than they actually are. The assistant may then jerk the steering wheel for no reason and brake while overtaking or, conversely, fail to react when it should.
The worst part is that the car often does not report an error. The driver drives under the impression that the braking assistant is protecting them, which changes their driving style. There is also a formal aspect: after a collision, the insurer may ask whether the required procedure was performed after the windshield replacement.
No. In addition to diagnostic software, a level work station, a board set up with millimeter accuracy relative to the vehicle's axis, and controlled lighting are needed. Clearing an error with a cheap tester connected to the OBD port only turns off the warning light. The system continues to operate on incorrect data, and the driver is unaware of this.
If the windshield was replaced without calibration or the procedure failed, it is usually visible in the behavior of the assistants:
More signals and what to do with them are described in the article about the symptoms of poor camera calibration.
In the case of damage settled from comprehensive insurance, glass insurance, or the liability of the at-fault party, calibration is usually part of the repair because without it, the windshield replacement with a camera is not complete. When reporting, it is worth noting that the vehicle has an ADAS camera so that calibration is included in the estimate. Details on settling glass claims from the policy can be found in the guide whether insurance covers a cracked windshield.
We perform windshield replacements with cameras and calibration at our locations in Hetmanice near Wschowa, in Luboń near Poznań, and in Zielona Góra. We handle the windshield and calibration in one place, calibrating according to the manufacturer's procedures, and after calibration, you receive a protocol.
To ensure an accurate estimate, please provide the VIN number or the make, model, and year of the vehicle when reporting. Based on the VIN or the eurocode of the old windshield, we will select a windshield with the correct camera mount and check what procedure your vehicle requires.
A few pieces of information provided during the inquiry shorten the visit and allow us to immediately provide the correct price. Let us know if any of the assistant warning lights are illuminated on the dashboard, if the vehicle has recently had its geometry adjusted or if the front has been repaired, and whether the windshield has already been replaced. If the windshield has a camera, it’s also worth mentioning any other equipment: rain sensor, heating, HUD display.
On the day of your visit, arrive with an empty trunk and without any load on the roof. The vehicle for calibration should be in the condition described by the manufacturer, and heavy items in the trunk can change its tilt and thus the camera's position relative to the road.
In a company, the most important factor is the time the vehicle is out of service. Therefore, for fleet orders, it’s best to provide all vehicles with a camera at the windshield right away and schedule the replacement along with calibration for the same appointment, allowing time for the adhesive to cure. This way, the vehicle leaves fully operational, and the driver does not have to return to the service a second time.
For delivery vehicles, the procedure is similar to that for passenger cars, but the windshields are larger, and some models have different requirements for positioning the vehicle at the station. We described how this works in trucks, where every hour of downtime costs money, in the article about windshield replacement and calibration in trucks.
In short: camera calibration is required after every windshield replacement where the camera's position changes, and at Glass-Pol, it costs approximately 450 PLN together with the windshield replacement and 550 PLN as a separate service. It usually takes from 45 minutes to two hours, and it cannot be done independently.
At Glass-Pol, it costs approximately 450 PLN when replacing the windshield with us and 550 PLN for the calibration alone. The price depends on the make, model, and type of procedure, which is why we confirm it before accepting the vehicle.
The static procedure usually takes from 45 minutes to two hours, while the dynamic one requires additional driving. Together with the windshield replacement and curing time for the adhesive, it’s advisable to reserve half a day.
Yes, if the camera is mounted at the windshield. Even a newly installed original windshield changes the camera's position, and the system must recalibrate it.
Usually not, because the windshield is not removed and the camera does not change position. An exception is damage in the camera's field of view - in that case, after the repair, it’s worth checking if the system reports any errors. More in the article about chip repair on the windshield.
The procedure is the same for both original (OEM) and replacement windshields, but the quality of the glass matters. A windshield with poorer optics in the camera's field of view can complicate calibration or cause recurring errors, which is why we select windshields for vehicles with cameras based on the eurocode, ensuring the correct mount and appropriate glass quality.
No. Calibration pertains to the camera of the driver assistance systems. If there is only a rain and dusk sensor at the windshield, it is sufficient to install it correctly on the new windshield.
Yes, but until the calibration is done, camera-based assistants are not reliable. It’s better to schedule the replacement and calibration for the same day and pick up the vehicle fully operational.
Usually yes, if the radar was removed or the bumper was hit. However, this is radar calibration, not camera calibration at the windshield. It applies regardless of whether the windshield was replaced.
Provide the make, model, and year or the VIN number. We will check what procedure your vehicle requires, select the windshield based on the eurocode, and schedule an appointment at the nearest location. Call: 667 525 554.

Did the windshield break in your MG, BYD or BAIC? At Glass-Pol, we offer quick OEM windshield replacement and precise ADAS calibration for brands from China. Don't wait for parts from Asia – you can do it right away with us!

Sprawdź, czy kamera w szybie działa prawidłowo po wymianie. Poznaj objawy złej kalibracji ADAS i dowiedz się, kiedy jest konieczna.
Pojazdy elektryczne (EV) różnią się od spalinowych nie tylko napędem. Wymogi dotyczące aerodynamiki, wyciszenia i energooszczędności sprawiły, że producenci zaczęli stosować nowe technologie
Mercedes C-Klasa W206, produkowany od 2021 roku, to zupełnie nowa konstrukcja w porównaniu z wcześniejszymi modelami (W205, W204, W203). Jednym z elementów, który uległ znacznym zmianom, jest
Wymiana szyby czołowej w nowoczesnym samochodzie to już nie tylko kwestia montażu szkła. Coraz więcej aut jest wyposażonych w systemy ADAS (Advanced Driver Assistance Systems) – czyli zaawans